Common Knots
- Uni Knot
- Palomar Knot
- Improved Clinch Knot
Uni Knot
A Uni knot, also known as the Duncan Loop knot, is a versatile fishing knot used for tying monofilament or fluorocarbon fishing line to a hook, swivel, or lure.
It is a simple knot to tie and is known for its strength and reliability. It can be easily tied with either wet or dry line.
How to Tie a Uni Knot
- Run line through the eye of the hook and double back parallel to the standing line.
- Make a loop by laying the tag end over the doubled line.
- Make 6 turns with the tag end around the double line and through the loop.
- Moisten the lines and pull the tag end tight.
- Trim the end of the line close to the knot, being careful not to cut the standing line.
- Finally, test the knot by gently pulling on the standing line and checking for any signs of slipping or weakness. If necessary, tighten the knot again and trim the end of the line as needed.
With practice, you will be able to quickly and easily tie a Uni knot that is strong and reliable.
Palomar Knot
The Palomar knot is a strong and simple fishing knot used for tying a fishing line to a hook, lure, or swivel. It is a popular knot for many anglers because of its strength and reliability.
One of the benefits of the Palomar knot is that it is easy to tie and can be tied quickly, even in low light conditions or with cold, wet hands.
Additionally, the Palomar knot has a high breaking strength and is less likely to slip or come undone than other knots.
How to Tie a Palomar Knot
- Pass the end of your line through hook eye once, then double back and pass the end of line through hook eye again from opposite direction, leaving about six inches of doubled line outside the hook eye.
- Tie a loose overhand knot with hook hanging from bottom.
- Holding the overhand knot between thumb and forefinger, pass the loop of line over the hook.
- Slide the loop above eye of hook.
- Pull on both the standing line and tag end of the line to tighten the knot down onto eye.
- Once the knot is tight, trim the tag end of the line, being careful not to cut the standing line.
- Test the knot by gently pulling on the standing line and checking for any signs of slipping or weakness. If necessary, tighten the knot again and trim the end of the line as needed.
Overall, the Palomar knot is a strong and reliable knot that is well-suited for a wide range of fishing applications, and is definitely worth learning for any angler.
Improved Clinch Knot
The Improved Clinch Knot, also known as the Dry Fly Knot, is a popular fishing knot used for tying a fishing line to a hook.
The Improved Clinch Knot is known for its strength, simplicity, and versatility, making it a good choice for many different fishing applications.
One of the benefits of the Improved Clinch Knot is that it is easy to tie and can be tied quickly, even in low light conditions or with cold, wet hands.
Additionally, the Improved Clinch Knot has a high breaking strength and is less likely to slip or come undone than other knots.
How to Tie a Improved Clinch Knot
- Thread end of line through eye of hook. Double back making 5 or more turns around standing line.
- Bring end of line back through the first loop formed behind the eye then through the big loop.
- Wet knot and pull on tag end to tighten down the coils.
- Once the knot is tight, trim the tag end of the line, being careful not to cut the standing line.
- Test the knot by gently pulling on the standing line and checking for any signs of slipping or weakness. If necessary, tighten the knot again and trim the end of the line as needed.
Overall, the Improved Clinch Knot is a strong and reliable knot that is well-suited for a wide range of fishing applications, and is definitely worth learning for any angler.